Results 1 to 2 of 2
- 08-16-2003, 01:26 AM #1tymGuest
Ok - Here goes.
I've written a VB6 application which dials up a particular comms
device
and downloads data from it - ok - nothing to write home about there!!
Well...
Using a "normal" modem on my PC - everyting works just fine and dandy.
Set
MsComm1.Settings = "2400,e,7,1"
( Yes that's 2400... its an OLD device!!)
MsComm1.Handshaking = 2
RThreshold and SThreshold are both 1
RTSEnable = True
use OnComm to trap for activity and everything comes in sweetly
The problem arises when I try the same code using my laptop and my
Nokia 6310i.
As well as the CommEvent 1 and CommEvent 2 activities, I get a
CommEvent 3 occuring
(comEvCTS 3 Change in Clear To Send line. )
This appears to be stopping the data from being downloaded.
What it CommEvent 3 - why does it happen and why is it stopping the
data flow?
What can I do to get around it? -Is there anything?
Yours in anticipation...
Tym
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
See http://www.ictis.net/no_spam.html for unsolicited email warning
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Tym
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
See http://www.ictis.net/no_spam.html for unsolicited email warning
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
› See More: Visual Basic Comms
- 09-01-2003, 05:04 AM #2tymGuest
Re: Visual Basic Comms
On Sat, 16 Aug 2003 08:26:21 +0100, tym
<[email protected]> wrote:
>Ok - Here goes.
>
>I've written a VB6 application which dials up a particular comms
>device
>and downloads data from it - ok - nothing to write home about there!!
>
>Well...
>
>Using a "normal" modem on my PC - everyting works just fine and dandy.
>
>Set
>MsComm1.Settings = "2400,e,7,1"
>( Yes that's 2400... its an OLD device!!)
>MsComm1.Handshaking = 2
>RThreshold and SThreshold are both 1
>RTSEnable = True
>
>use OnComm to trap for activity and everything comes in sweetly
>
>The problem arises when I try the same code using my laptop and my
>Nokia 6310i.
>
>As well as the CommEvent 1 and CommEvent 2 activities, I get a
>CommEvent 3 occuring
>(comEvCTS 3 Change in Clear To Send line. )
>
>This appears to be stopping the data from being downloaded.
>
>What it CommEvent 3 - why does it happen and why is it stopping the
>data flow?
>
>What can I do to get around it? -Is there anything?
>
>Yours in anticipation...
>Tym
>
>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>See http://www.ictis.net/no_spam.html for unsolicited email warning
>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>Tym
>
>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>See http://www.ictis.net/no_spam.html for unsolicited email warning
>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Tym
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
See http://www.ictis.net/no_spam.html for unsolicited email warning
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Similar Threads
- Computers
- alt.cellular.ericsson
- alt.cellular.ericsson
- alt.cellular.ericsson
What benefits does the Kindle e-book reader offer?
in Chit Chat