comment
Results 1 to 1 of 1
  1. by
    cell-unlocker
    on
    Follow cell-unlocker On Twitter Add cell-unlocker on Facebook


    Cellunlocker.net is proud to announce the x10 Instant unlocking software is back online!

    this ONLY supports Sony Ericsson Xperia: x10, x10a, x10i

    (Sorry no mini, arc, and play right now. Available later)


    GET MY X10 UNLOCKING SOFTWARE NOW!

    -This software will unlock your Xperia x10 so you can bypass the "Enter Network Unblock pin" or "Enter Network Sim Pin"
    -Once unlocked, it will permanently unlocked it, even after upgrading the software
    -Once you unlock it, you will be able to another GSM Carrier. Please make sure the simcard will be compatible with the x10 you unlock first.

    Xperia X10 Unlocking Software Guide:


    Support Models:

    *Xperia X10
    *Xperia X10i
    *Xperia X10a
    *Xperia X10 Mini - E10i
    *Xperia X10 Mini Pro - U20 - U20i
    *Xperia X8 - E15i New
    *Xperia W8 - E16 - E16i

    Please make sure:

    * Your X10 is not running ANDROID V1.6, it must be updated to at least V2.1
    * You have not flashed custom firmware to your phone
    * You must have internet connection

    Supported Operating Systems

    * Windows XP
    * Windows Vista 32 bit
    * Windows Vista 64 bit
    * Windows 7 32 bit
    * Windows 7 64 bit
    * (No Mac OS right now)
    *

    STEP 1: Install the Drivers

    Before you can unlock your phone you must install SEMC flash drivers & ADB drivers, this sounds complicated but is in fact a very simple process.

    Make sure you have installed the Multi Unlock Client,then follow this procedure (see the video for further guidance)

    1. Go to START > ALL PROGRAMS > MULTI UNLOCK CLIENT > X10 DRIVERS
    2. Select the correct 32 bit or 64 bit shortcut folder for your Operating System
    3. First run “SEMC Flash Driver Install”
    4. Complete the install wizard that appears
    5. Second run “ADB Driver Install”
    6. Complete the install wizard that appears
    7. Next we need to connect the X10 in Flash Mode (some times called boot mode)
    8. Remove the battery for 10 seconds and replace
    9. With the phone still powered off, Press & HOLD the “Back Button”
    10. Still holding the Back Button connect the USB cable
    11. Windows will now detect the new hardware and automatically install the drivers.
    12. Once complete, remove the USB cable from the phone and power the phone on.
    13. Next we will connect the phone with “USB Debugging” Enabled
    14. On the phone go to “Settings”
    15. Next go to “Applications”
    16. Next go to “Development”
    17. Now enable “USB Debugging”
    18. Click “OK” to confirm enabling of USB Debugging
    19. Now connect the USB cable
    20. Windows will now detect the new hardware and automatically install the drivers.
    21. Once complete you can proceed to unlock your X10

    STEP 2: Unlocking your X10

    Please follow this 1 step at a time.

    First you must open the unlock client and enter your USERNAME and PASSWORD

    1. Go to START > ALL PROGRAMS > MULTI UNLOCK CLIENT
    2. If you are using WINDOWS VISTA or WINDOWS 7 right click on “Unlock Client” the software and select “Run as administrator”
    3. Windows XP, double click “Unlock Client”
    4. Under the settings tab, Enter your LOGIN/USER NAME and your PASSWORD
    5. Click “Save Login Data”

    Now we can proceed to Unlocking the X10

    1. Now click on the “SE” tab of the software
    2. Make sure that your phone is running a later version of ANDROID that 1.6 (tick the box to confirm on the Unlock Client) or ….
    3. If you are unsure if your phone is running v2.1 or later, then connect the phone in USB Debugging Mode & click “Check Phone”
    4. Ok, we now know we are running ANDROID 2.1 or above (if you are not then please upgrade your phone and start again)
    5. Remove your phones battery for 10 seconds and replace
    6. Press and HOLD the phones back button
    7. While still holding the phones back button connect the USB cable.
    8. The unlock client will now start the unlock process
    9. When prompted by the UNLOCK CLIENT, remove the USB cable and power on the phone.
    10. Make sure the phone is in USB Debugging Mode and connect the USB Cable again
    11. The UNLOCK CLIENT will now complete the unlock

    PHONE IS NOW UNLOCKED!

    GET MY X10 UNLOCKING SOFTWARE NOW!



    See More: Xperia x10 Instant Unlocking Software Back Online!
    Last edited by cell-unlocker; 08-08-2011 at 09:13 PM.




  • Phones Discussed Above

    Sony Ericsson Xperia X10 More Sony Ericsson Xperia X10 topics Sony Ericsson Forum Reviews
  • Similar Threads







  • Quick Reply Quick Reply

    If you are already a member, please login above.